Engine mounting, right-hand
|
Engine mounting, right-hand
|
1.
|
Drape wing protectors over the wings.
|
2.
|
Position a jack under the oil sump, using a wooden block or the like between sump and jack, and take the weight of the engine off the engine mounting.
|
3.
|
Mark the position of the engine mounting on its yoke with a cross.
|
4.
|
Remove the engine mounting's yoke.
Important
|
Since the retaining yoke's bolts are screwed into aluminium, it is easy to damage the threads in the metal.
|
|
|
5.
|
Remove the engine mounting.
|
1.
|
Fit the engine mounting.
Tightening torque: 63 Nm (46.5 lbf ft)
|
2.
|
Fit the yoke, centre the engine mounting in the yoke as marked, lower the engine and check that it hangs neutrally by shaking it.
|
3.
|
Tighten the engine mounting's retaining nuts, using a torque wrench.
Tightening torque: 105 Nm (77.5 lbf ft)
|
4.
|
Remove the jack and wing protectors.
|