Valve seats
Valve seats |
Use a milling kit with T-wrench, locating shaft for valve seat cutter part no. 83 95 097, cutters part no. 78 61 040 (45˚), part no. 83 93 936 (60˚) and part no. 83 95 105 (70˚).
1- Exhaust valve
2- Inlet valve
Valve seat angle:
45˚Regrinding angle:
60˚ (exhaust)71&ring (intake)
Valve seat width:
1.4 -1.8 mm (exhaust)1.0 -1.4 mm (intake)