Charge air absolute pressure sensor

/ 9-5 (9600) / 2000 / 2. Engine / Trionic T7, 4-cyl (B205E) / Adjustment/replacement / Charge air absolute pressure sensor

To remove

1.	Unplug the ignition discharge module's 10-pin connector and bend it to one side.

2.	Unplug the sensor's connector.

3.	Undo the connector.

To fit

Fit in reverse order.

Spray the connector with Kontakt 61 contact cleaner (part no. 30 21 763).

Change the sealing washer as necessary.

Lubricate the threads with Molykote 1000 (part No. 30 20 271) or the equivalent.

Tightening torque: 17 Nm (12 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.