Charge air control valve

/ 9-5 (9600) / 2000 / 2. Engine / Trionic T7, 4-cyl (B205E) / Adjustment/replacement / Charge air control valve

To remove

1.	Unplug the connector.

2.	Mark the hoses to the control valve and detach them.

3.	Detach the valve from the expanding pin and metal bracket.

To fit

1.	Attach the valve to the metal bracket and then to the expanding pin.

2.	Connect the hoses to the control valve. Make sure the markings on the hoses correspond with the markings on the control valve.

3.	Spray the connector with Kontakt 61 contact cleaner (part no. 30 21 763). Plug in the connector.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.