Limp-home solenoid
Limp-home solenoid |
To remove |
1. |
Remove the engine cover.
|
2. |
Undo the lower screw (it may be difficult to reach) using a magnetic T15 bit.
|
3. |
Unplug the connector.
|
4. |
Remove the upper screw.
|
5. |
Remove the solenoid (not available as a separate spare part).
|
To fit |
Fit in reverse order.
Spray the connector with Kontakt 61 contact cleaner (part no. 30 21 763).
Tightening torque: 2.5 Nm (1.8 lbf ft)
Important | ||
The throttle body will go to mechanical limp home mode when the limp-home solenoid is removed. After refitting, the limp-home mechanism must therefore be reset as described in "Resetting activated limp-home mechanism". |
||