P0340
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE comes on after two driving cycles.
Camshaft Position Sensor. Malfunction.
Fault symptoms
|
•
|
CHECK ENGINE comes on after two driving cycles.
|
Conditions
The following conditions apply for this DTC:
|
•
|
Engine running and main relay voltage exceeds 11 V.
|
|
•
|
1000 ignitions have occurred since start.
|
|
•
|
Ignition timing and fuel injection have not been synchronized with the camshaft position.
|
Diagnostic help
Fault diagnosis concerns electrical faults in connecting cables, sooty or defective spark plugs, or in the ignition discharge module.
Diagnostic tool functions related to this fault are:
|
•
|
Camshaft position synchronized, ON/OFF.
|
|
•
|
Combustion Detection Cyl 1+2/Bank 1, in %
|
|
•
|
Combustion Detection Cyl 3+4/Bank 2, in %
|
See also the description of readings under
Menu "Read Values"
for more information.
