Fault handling I, catalyst damaging misfiring
|
Fault handling I, catalyst damaging misfiring
|
If catalyst damaging misfiring occurs, the driver is warned immediately by the CHECK ENGINE lamp flashing at 1 Hz, irrespective of whether the lamp was already on or not. A diagnostic trouble code will be generated at the same time.
For the CHECK ENGINE lamp to go out without any other measures being taken requires 3 consecutive driving cycles under similar operating conditions as when the fault first occurred without the catalyst damaging misfiring returning.
For the diagnostic trouble code to be cleared requires a further 40 fault-free warming-up cycles.
1.
|
Fault criteria for catalyst damaging misfiring fulfilled
Dependents are OK
|
2.
|
CHECK ENGINE lamp flashing at 1 Hz, diagnostic trouble code generated
|
3.
|
Catalyst damaging misfiring ceases
|
4.
|
Diagnostic trouble code cleared
|
5.
|
CHECK ENGINE lamp goes on continuously
|
6.
|
Catalyst damaging misfiring does not occur for 40 warming-up cycles
|
7.
|
Catalyst damaging misfiring does not occur for 3 consecutive driving cycles under similar operating conditions as when the fault first occurred
|
9.
|
CHECK ENGINE lamp goes out
|