No.
|
Name
Location
|
Illus.
|
|
Components
|
|
22a
|
Main fuse box, dashboard,
on the dashboard end by the driver's door
|
|
102
|
Relay, fuel pump,
on the main relay board in the dashboard
|
|
157
|
Spark plugs,
on the engine
|
|
205
|
Mass air flow sensor,
behind the RH headlamp
|
|
206a
|
Injector, cyl 1,
on top of the intake manifold
|
|
206b
|
Injector, cyl 2,
on top of the intake manifold
|
|
206c
|
Injector, cyl 3,
on top of the intake manifold
|
|
206d
|
Injector, cyl 4,
on top of the intake manifold
|
|
229
|
Main relay, engine control system,
on the main relay board in the dashboard
|
|
271
|
Heating element, heated oxygen sensor,
integrated in the heated oxygen sensor
|
|
323
|
Motor, fuel pump,
in the fuel tank
|
|
346
|
Ignition discharge module,
on the camshaft cover
|
|
589
|
Trionic engine control module, 4 cyl. LEV/OBDII,
in space (cabin side) in front of the windscreen on the passenger side
|
|
592Fa
|
Heated oxygen sensor 1, LEV/OBDII,
in front of the catalytic converter
|
|
592Ra
|
Heated oxygen sensor 2, LEV/OBDII,
after the catalytic converter
|
|
605
|
Solenoid valve, by-pass turbo,
in the engine bay on the bulkhead partition wall by connector H42-5
|
|
|
4-pin connector
|
|
H4-2
|
Under rear seat
|
|
|
42-pin connector
|
|
H42-5
|
In centre of bulkhead partition (engine bay side)
|
|
|
80-pin connector
|
|
H80-1
|
In the connector bracket under the LH A-pillar
|
|
|
Crimp connections
|
|
J15
|
Approx. 100 mm from grounding point G7 towards oxygen sensor
|
|
J16
|
LHD:
Approx. 20 mm from the cable tie on the Trionic engine control module connector.
RHD:
Approx. 35 mm from cable tie on the Trionic control module connector
|
|
J18
|
Approx. 60 mm from branching point of injector 4 towards injector 3
|
|
J20
|
Approx. 115 mm from branching point of crankshaft position sensor towards connector H42-5
|
|
J24
|
LHD:
Approx. 45 mm from cable tie on Trionic control module connector
RHD:
Approx. 30 mm from the injector 4 branching point towards connector H42-5
|
|
J55
|
LHD:
Approx. 125 mm from branching point of DICE control module towards relay board
RHD:
Approx. 90 mm from branching point of DICE control module towards fuse box
|
|
J83
|
LHD:
Approx. 260 mm from branching point of grounding point G40 towards DICE control module
RHD:
Approx. 190 mm from main fuse box towards DICE control module
|
|
J93
|
Approx. 300 mm from the branching point of grounding point G5 towards the LH rear door.
|
|
|
Grounding points
|
|
G5
|
Under the back seat in the LH corner.
|
|
G7
|
On the engine
|
|