SAAB WIS ONLINE

Fuel pressure regulator

Fuel pressure regulator

Warning

Removal of the fuel pressure regulator involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work:

• Work only in a well-ventilated area. If approved equipment for the extraction of fuel vapours is available, be sure to use it.

• Wear suitable gloves. Prolonged contact with fuel can cause skin irritation or dermatitis.

• Keep a class BE fire extinguisher near at hand. Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting leads in electrical circuits.

• No smoking anywhere in the vicinity,

• Wear protective goggles.


To remove



1. Reduce fuel pressure by removing fuel pump fuse no. 19 while the engine is idling. Turn off the ignition once the engine has stopped and replace the fuse.

2. Remove the engine cover.

3. Remove the vacuum hose.

4. Loosen the clamp and remove the regulator carefully. Keep an absorbent cloth or paper nearby to take care of any fuel spills.


To fit


Important

Lubricate the O-ring with non-acidic vaseline before fitting.



1. Fit the regulator and tighten the clamp.

2. Connect the vacuum hose.

3. Make sure the system is tight.

4. Fit the engine cover.