Ignition discharge module, front
Ignition discharge module, front |
1. |
Remove the engine cover.
|
2. |
Remove the ignition discharge module.
|
3. |
Unplug the ignition discharge module connector.
|
To fit |
1. |
Coat the rubber seals with Krytox (part No. 30 19 312).
|
2. |
Spray the connector with Kontakt 61 contact cleaner (part no. 30 04 520). Plug in the connector.
|
3. |
Fit the ignition discharge module.
Tightening torque: 8 Nm (6 lbf ft). |
4. |
Fit the cover.
|