Throttle body (604)
Throttle body (604) |
Throttle motor
|
|
||
Type
|
Brushless
|
||
Resistance at 20 °C (68°F) pin 10-5
|
Ohm
|
1.13±5%
|
|
Control voltage
|
12 V PWM
|
600 Hz
|
Throttle position sensor 1
|
|
||
Throttle closed, pins 6-9
|
V
|
0.065-1.090
|
|
Throttle fully open, pins 6-9
|
V
|
3.930-4.775
|
Throttle position sensor 2
|
|
||
Throttle closed, pins 8-9
|
V
|
3.910-4.935
|
|
Throttle fully open, pins 8-9
|
V
|
0.025-1.070
|
Pedal position sensor 1
|
|
||
Pedal released, pins 1-9
|
V
|
3.990-4.645
|
|
Pedal fully depressed, pins 1-9
|
V
|
0.400-1.055
|
Pedal position sensor 2
|
|
||
Pedal released, pins 3-9
|
V
|
0.355-1.010
|
|
Pedal fully depressed, pins 3-9
|
V
|
3.945-4.600
|
All position sensors
|
|
||
Power supply
|
V
|
5
|
|
Resistance, potentiometer
|
Ohm
|
2k±20 %
|
|
Resistance, potentiometer output
|
Ohm
|
0.8 k
|
All potentiometers are connected in parallel between 5 V and ground. The total resistance is therefore about 500 ohms ± 20%.
Resistance measurement should be avoided when carrying out fault diagnosis. Use the voltages for the position sensor concerned instead.