EVAP canister shut-off valve
EVAP canister shut-off valve |
To remove |
1. |
Raise the car.
|
2. |
Cut the cable tie.
|
3. |
Unplug and detach the connector to the vent device.
|
4. |
Detach the vent device from the filler pipe bracket with a screwdriver.
|
5. |
Clean the vent device.
|
6. |
Remove the top cover over the shut-off valve.
|
7. |
Detach the connector from the shut-off valve and remove the washer.
|
8. |
Move the cover along the hose to access the hose clip.
|
9. |
Remove the valve by undoing the valve hose connection.
|
To fit |
1. |
Connect the valve to the hose.
|
2. |
Connect the hose.
|
3. |
Refit the washer.
|
4. |
Fit the cover over the valve, making sure the cables locate in the washer opening.
|
5. |
Spray with Kontakt 61 and plug in the connector.
|
6. |
Fit the front cover.
|
7. |
Fit the vent device to the filler pipe.
|
8. |
Spray with Kontakt 61 and plug in the connector to the vent device.
|
9. |
Secure the cables with a cable tie.
|
10. |
Lower the car to the floor.
|