Temperature sensor, coolant
|
Temperature sensor, coolant
|
1.
|
Fit a new sealing washer if necessary.
Lubricate the threads with Molykote 1000 (part No. 30 20 971) or the equivalent.
|
2.
|
Spray the connector with Kontakt 61 (part no. 30 21 763) and connect it to the sensor.
|
3.
|
Fit the throttle body. Replace its O-ring if necessary.
|
4.
|
Connect the throttle cable and adjust if necessary.
|
5.
|
Fit the turbo pressure hose to the throttle body.
|
6.
|
After fitting, top up with coolant as necessary. Dilute the coolant with water to a mixture of 1:1 (equal parts water and coolant).
Start the car and run it warm. Make sure no leaks have occurred. Top up with coolant if necessary.
Fit the cover.
Tightening torque: 13 Nm (9.6 lbf ft)
|