P0112
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
P0112 |
Fault symptoms
CHECK ENGINE.On-Board Diagnostics
Type of diagnosis:- |
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
- |
Engine running.
|
Fault criteria:
- |
Voltage below 0.125 V for more than 1 s.
|
Dependents:
- |
None.
|
System reaction to a fault:
- |
Substitute value set to 40°C.
|
OK report:
- |
60 s has past since start. Fault criteria for P0112 or P0113 not fulfilled.
|
Fault handling: (See section Fault handling III, other emission-related components and functions for more information.)
- |
Type III.
|
Diagnostic help
Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.Functions in the diagnostic tool related to the fault:
• |
Temperature sensor reading, in °C.
|
See also description of readings under "Read Values" menu for more information.