P0340
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
Camshaft Position Sensor. Malfunction.
Fault symptoms
On-Board Diagnostics
Type of diagnosis:
-
|
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
-
|
Engine running. Main relay voltage exceeding 11V. 1000 combustions have occurred since start.
|
Fault criteria:
-
|
Ignition timing and fuel injection have not been synchronized with the camshaft position.
|
Dependents:
System reaction to a fault:
OK report:
-
|
Enable criteria fulfilled. Fault criteria not fulfilled.
|
Fault handling:
(See section
Fault handling III, other emission-related components and functions
for more information.)
Diagnostic help
First, make sure that no trouble codes have been generated that indicate a faulty fuel-air mixture. Then, check the spark plugs.
Functions in the diagnostic tool related to the fault:
•
|
Diagnostic status for the diagnosis.
|
•
|
Camshaft position synchronized, unit ON/OFF.
|
See also description of readings under
"Read Values" menu
for more information.