SAAB WIS ONLINE

P0501

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE. Cruise control not working. Low engine torque on cars with manual gearbox.

P0501


Vehicle Speed. Input signal outside limits.


Fault symptoms


CHECK ENGINE.

Cruise control not working.

Low engine torque on cars with manual gearbox.


On-Board Diagnostics

Type of diagnosis:


- Tests 1 and 2: Continuous but interrupted when fault criteria fulfilled and does not restart until next driving cycle.


Enable criteria:


- General conditions for this trouble code: When starting the engine, the atmospheric pressure must exceed 78 kPa and the engine coolant and intake air temperatures must exceed -7°C.

- Test 1: Engine running.

- Test 2: Engine running. Speed 50-205 km/h for longer than 10 s. Brake pedal not depressed.


Fault criteria:


- Test 1: Speed exceeding 270 km/h.

- Test 2: Speed rises more than 120 km/h or drops more than 50 km/h within 1 s.


Dependents:


- None.


System reaction to a fault:


- Cruise control blocked. Vehicle speed (Bus from MIU) used as substitute value.


OK report:


- 60 s has expired since start. Vehicle speed has exceeded 0 on some occasion.


Fault handling: (See section Fault handling III, other emission-related components and functions for more information.)


- Type III.


Diagnostic help

Fault diagnosis concerns an electrical fault in connecting leads. (Check if fault is in ABS first.)

Functions in the diagnostic tool related to the fault:


Diagnostic status for the diagnosis.

Vehicle Speed (Wire from ABS), unit km/h


See also description of readings under "Read Values" menu for more information.

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.