P1240
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
Engine runs unevenly.
Cruise control inoperative.
Starting problems, especially when engine is cold.
Throttle Motor Circuit. Shorted.
Fault symptoms
|
•
|
Cruise control inoperative.
|
|
•
|
Starting problems, especially when engine is cold.
|
On-Board Diagnostics
Type of diagnosis:
|
-
|
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
|
-
|
Ignition in ON position.
|
Fault criteria:
|
-
|
Motor current exceeding 8A during the positive or negative section of the PWM period. Criteria fulfilled for 3 min.
|
Dependents:
System reaction to a fault:
|
-
|
Cruise control is blocked.
|
OK report:
|
-
|
Accelerator pedal has been depressed at some time and then fully released. 120 s has expired since then without fault criteria being fulfilled.
|
Fault handling:
(See section
Fault handling III, other emission-related components and functions
for more information.)
Diagnostic help
This DTC is generated when the lead from control module pin 48 is shorted to B+.
Diagnostic tool functions related to this fault are:
|
•
|
Activation of output for throttle motor.
|
See also the description of activations under
Menu "Activation"
for more information.
Check the wiring
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.
