P1633
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
P1633 |
Fault symptoms
• |
CHECK ENGINE.
|
On-Board Diagnostics
Type of diagnosis:- |
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
- |
Engine running.
|
Fault criteria:
- |
Voltage from atmosphere absolute pressure sensor higher than 4.920 V for more than 1 s.
|
Dependents:
- |
None.
|
System reaction to a fault:
- |
Starting charge air pressure value used as substitute value. Purge blocked.
|
OK report:
- |
Fault criteria for P1631, P1632 or P1633 not fulfilled.
|
Fault handling: (See section Fault handling III, other emission-related components and functions for more information.)
- |
Type III.
|
Diagnostic help
Fault diagnosis concerns an internal control module fault as the sensor is mounted in the control module.Functions in the diagnostic tool related to the fault:
• |
Pressure sensor reading, in kPa.
|
With the engine switched off, the reading should correspond with those of the other two pressure sensors. Permissible difference: 10 kPa.
See also description of readings under "Read Values" menu for more information.