Outer light cluster, rear 5D

/ 9-5 (9600) / 2000 / 3. Electrical System / Lighting and signalling systems / Adjustment/replacement / Outer light cluster, rear 5D

To remove

1.	Remove the covers on the screws.

2.	Remove the screws.

3.	Loosen the light cluster at an angle and pull out the retaining clips. Unplug the connector.

4.	Press in the clips and remove the plastic cover plate.

4.a.

Yellow lampholder: direction indicators

4.b.

Black lampholder: tail and brake lights

To fit

1.	Press in the hooks and snap on the plastic cover plate.

2.	Plug in the connector and push in the light cluster retaining clips. Screw on the light cluster.

3.	Fit the covers.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.