Distance sensor (SPA)
| Distance sensor (SPA) |
| 1. |
Press in the centre of the distance sensor with your thumb (approx. 10 kg pressure).
|
|
| 2. |
Undo the 3 locking clips with a small screwdriver.
|
|
| 3. |
Pull the distance sensor out of the bumper.
|
|
| 4. |
Unplug the distance sensor connector.
|
|
| To fit |
| 1. |
Plug in the distance sensor connector.
|
|
| 2. |
Press the centre of the distance sensor into the sleeve, with the key on the sensor in the groove in the sleeve.
|
|
| 3. |
Press home the distance sensor in the bumper, aligning it with the slits on the left-hand edge of the hole.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
