Fluid delivery hoses, upper/lower (V6)
Fluid delivery hoses, upper/lower (V6) |
1. |
Raise the car.
|
2. |
Place an oil pan under the transmission to collect fluid spill.
|
3. |
Remove the banjo bolt from the transmission, plug the hole.
|
4. |
Detach the hose from the charge air cooler.
|
5. |
Lower the car to the floor.
|
6. |
Remove the banjo bolt from the radiator, remove the hose.
|
Fitting |
Note | ||
Change the seals in the banjo bolts. |
1. |
Put the hose in its correct position, note the securement between the pipes.
|
2. |
Tighten the banjo bolt in the radiator.
Tightening torque: 27 Nm (20 lbf ft) |
3. |
Connect and tighten the hose to the charge air cooler.
|
4. |
Fit the banjo bolt on the transmission and tighten it.
Tightening torque: 24 Nm (18 lbf ft) |
5. |
Lower the car to the floor.
|
6. |
Fill with transmission fluid, Texaco Texamatic DEXRON III (7045 EU, TL1863 US), to the correct level.
|