Torque converter seal
Torque converter seal |
To remove |
1. |
Remove the transmission, see
.
|
2. |
Lift out the torque converter.
|
3. |
Insert puller 87 92 384
into the seal and use
83 90 270 Sliding hammer
to extract the seal.
|
Fitting |
1. |
Fit the new seal with sleeve 87 91 311.
|
2. |
Position the torque converter.
|
3. |
Check that the torque converter is correctly positioned by placing a steel rule on the torque converter housing's mating surface and measuring the distance between the mating surface and the drive plate's contact surface on the torque converter.
The distance should be: min. 9 mm. |
4. |
Fit the transmission, see
.
|