Valve housing
Valve housing |
To remove |
1. |
Remove the valve housing cover. see
.
|
2. |
Unplug the solenoids' connectors.
|
3. |
Remove the nine bolts securing the valve housing.
|
4. |
|
5. |
Carefully detach the manual valve from the selector lever out of the retaining eye and carefully lift out the valve housing.
|
Fitting |
1. |
Lift the valve housing into position.
|
2. |
Fit the nine valve housing retaining bolts and tighten them.
Tightening torque: 7 Nm (5 lbf ft).
|
3. |
Plug in the solenoids' connectors.
|
4. |
Fit the valve housing cover, see
.
|