SAAB WIS ONLINE

Delivery pipe

Delivery pipe

To remove


1. (LHD) Lift up the central electric unit in the engine bay.


2. (LHD) Lift up the Maxi fuse holder.

3. (LHD) Remove the bracket for the central electric unit and move it to one side.

4. Draw brake fluid from the reservoir. Empty the delivery pipe by connecting brake bleeder 88 19 096 and draw out brake fluid through the bleed nipple.

5. Undo the clip securing the delivery pipe to the master cylinder.


6. Pull the delivery pipe from the master cylinder. Fit the clip.

7. Remove the clip securing the delivery pipe to the slave cylinder.

8. Remove the delivery pipe.


To fit



1. Make sure that the clips are fitted.

2. Place the delivery pipe in position and connect it to the slave cylinder and master cylinder.

3. Press the pipe into the plastic clip.

4. Top up the brake fluid and bleed the system as described under .

5. Check that the connections are sealed.

6. (LHD) Fit the bracket.


7. (LHD) Fit the Maxi fuse holder.

8. (LHD) Fit the central electric unit.

9. Test the clutch.