ABS warning light fails to come on.

Read the instructions below then start the fault diagnostic procedure.

Symptom: The ABS warning light does not come on. (The ABS warning-light test is activated when the ignition is switched on. During this test, the light should come on for about three seconds.)

ABS warning light fails to come on.

Fault symptoms

The ABS warning light does not come on. (The ABS warning-light test is activated when the ignition is switched on. During this test, the light should come on for about three seconds.)

Diagnostic help

The ABS warning light can be activated using the diagnostic tool.

-	Select: "Activate".

-	Select: "ABS warning light".

Conditions

Fault in circuit between pin 21 of the ABS control module and the ABS warning light on the MIU.