Parking heater
| Parking heater | 
 
  
  The parking heater applies B+ on ACC unit pin 3 when the coolant temperature by the parking heater outlet reaches 40°C. When the ignition is off, the following results:
| • | Air-mixing flaps controlled automatically according to the set temperature. | |
| • | Air distribution flap in defrost position for 25 min and then in defrost/floor position. | |
| • | Recirculation flap in the recirculation position when the temperature is below -10°C, otherwise fresh air | |
| • | fan current 6 A | |
| • | display shows only fan speed | |
| • | Manual selections can be made with all the buttons except OFF, ECON and rear window heating. If AUTO is pressed, the full display is shown. | |
The control module returns to normal as soon as B+ on pin 3 is interrupted or the ignition is turned to ON.
| Adjustment | 
The ACC unit can be adjusted with the diagnostics tool to:
| • | put the air-mixing flap continuously in full heating position and the air distribution flap continuously in defrost position | |
| • | select another fan current | |
| • | select how long the air distribution flap stays in defrost position before defrost/floor is selected | |

 
     
		