SAAB WIS ONLINE

(801-2332) Installing a new modification identity plate

TECHNICAL SERVICE BULLETIN
Bulletin Nbr: 801-2332
Date: ........... Februari 2002
Market: Ej US, CA
Installing a new modification identity plate


Cars affected

All Saab 9-5 M98-.

Background

On some variants of the Saab 9-5, the existing modification identity plate has been filled up with modification information. A new modification identity plate needs therefore to be fitted.

Parts required

49 00 007 Modification identity plate

16-30 15 815 Cleaner FL T875, sufficient for 50-100 cars.

Procedure


1. Open the luggage compartment. Lift and suspend the floor panel.

5D: Lift up the upholstery covering the spare wheel and hook it onto the tailgate.

2. 4D: Bend the modification identity plate into a gentle arc against the sill.


3. Clean the area for the plate with Teroson FL T875. Remove the protective plastic backing from the plate.

4. 4D: Press the modification identity plate into place as shown in the illustration.


5. 5D: Press the modification identity plate into place as shown in the illustration. Refit the upholstery over the spare wheel.


6. Lower the floor panel and close the luggage compartment.


Time/Warranty information

If an extra modification identity plate is needed, submit a claim using the following information:

Failed Object: 85598-01

Fault/Reason code: -

Location code: 09

Repair/Action code: 10

Time: 0.1 hour