Tailgate lock, 5D
Tailgate lock, 5D |
1. |
Open the tailgate.
|
2. |
Remove the frame around the inner door handle by prising with a screwdriver in the three recesses. Once the frame clips have been released, pull the frame down and bend it out.
|
3. |
Remove the inner tailgate trim by removing the door pull retaining screws and the plastic clips in the trim.
|
4. |
Lift off the tailgate trim as described below:
|
4.a. |
Pull down the top of the trim to release it from the clips.
|
4.b. |
Pull back on the trim to release the guide pin at the door pull, taking care not to break it.
|
5. |
Remove the three lock rods attached with clips to the lock.
|
6. |
Unscrew the four lock retaining bolts.
|
7. |
Remove the lock and unplug the connector.
|
To fit |
1. |
Plug in the connector and position the lock. Screw it on with the four bolts.
|
2. |
Fit the lock rods to the lock.
|
4. |
Fit the frame around the inner door handle.
|