Emblem, 4D boot lid
Emblem, 4D boot lid |
The emblem is supplied as a spare part in a package comprising a frame with transparent window and protective tape backing. The following directions show how to mount the emblem. Use the frame as a template to measure out the dimensions on the boot lid.
To remove |
Protect the paintwork with tape around the emblem. Use a putty knife to carefully prise under the emblem.
To fit |
Note | ||
The emblems and the car body must be at room temperature (approx. 20°C) before the emblem can be affixed. |
1. |
Remove the protective tape backing from the emblem and leave the emblem in the frame.
|
2. |
Position the frame according to the measurements in the illustration and mount the SAAB emblem.
|
3. |
Remove the frame.
|
4. |
Position the frame and mount the 9-5 emblem.
|
5. |
Remove the frame.
|