Luggage compartment illumination (5D)
| Luggage compartment illumination (5D) |
| To remove |
| 1. |
Pull loose the rear roof cover plate, which is fastened with clips.
|
|
| 2. |
Unplug the connector and remove the cover plate.
|
|
| 3. |
Remove the lighting by prising with a screwdriver in the recesses.
|
|
| To fit |
| 1. |
Fit the lighting.
|
|
| 2. |
Plug in the luggage compartment illumination connector and position the roof cover plate.
|
|
| 3. |
Press the roof cover plate into the clips.
Check the fit of the sealing strip over the cover plate. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
