SAAB WIS ONLINE

Air recirculation motor

Air recirculation motor

To remove



1. Remove the glove compartment, se group 8, Interior equipment , ”Adjustment and replacement”.

Remove the trim from the side of the centre console.

2. Remove the air recirculation motor, 2 bolts.


3. Unplug the connector.

4. Cut the cable tie holding the wiring harness.

5. Remove the connector from the plate.


To fit



1. Fit the air recirculation motor.

2. Refit the connector in the plate.


3. Fasten the wiring harness with a cable tie.

4. Connect the contact.

5. Refit the side trim.


Fit the glove box, see group 8, Interior equipment , ”Adjustment and replacement”.