SAAB WIS ONLINE

Engine oil and oil filter

Engine oil and oil filter


Check for oil leakage

Check that no oil leakage occurs at the top or bottom of the engine and gearbox or in the power steering's hydraulic system.

If there is an oil leak on the auxiliary side of the engine, it is recommended that the drive belt is inspected and replaced if necessary.

Engine oil


Change oil.

Oil capacity

B205E, B235E: 4.0 litres (4.3 qts) including filter

B308E: 4.5 litres (4.8 qts) including filter

Oil type, see Recommended oil grade



Drain plug, tightening torque:

B205E, B235E, B308E: 25 Nm (19 lbf ft)

Check the oil level after changing engine oil and oil filter.




Viscosity, see Recommended oil grade



Oil filter



1. Loosen the oil filter with the filter wrench and unscrew it. Clean the sealing surface on the engine.

2. Oil in the rubber gasket on the new oil filter and fit it.

Tightening torque: 10 Nm (7.4 lbf ft).

3. Start the engine and check the filter for leaks.