Road test
| Road test |
Only SE, US and CA . OBD II specification car: Check that there are no remaining faults that could initiate a CHECK ENGINE warning.
| • |
Road testing should continue for at least 15 minutes at varying engine loads.
|
|
| • |
Finish the road test by running the engine at idling speed with the selector lever in the N position and without any load from the A/C compressor or generator (all current-consuming components and A/C switched off) for 30-60 seconds.
|
|
| Functionality checks |
| • |
Ignition switch: Check that the gear-lever lock operates satisfactorily and that the key is easy to insert and remove. Check the Parking position lock on cars with automatic transmission (certain markets only).
|
|
| • |
Engine: Check function and noise level. Make sure the engine acceleration is normal.
|
|
| • |
Clutch: Check the clutch disengagement and engagement positions.
|
|
| • |
Manual gearbox: Check gearbox operation and noise level.
|
|
| • |
Automatic transmission: Check the starting interlock, i.e. that the engine can be started only when the selector lever is in P or N. Noise level and shifting performance.
|
|
| • |
Wheels: Check wheel balance and wheel roundness.
|
|
| • |
Steering: Check the straight-ahead position of the steering wheel, directional stability and operation of the power steering system.
|
|
| • |
Instruments and indicator lamps: Check the operation of instruments and indicator lamps.
|
|
| • |
Brakes: Check brake pedal travel, handbrake lever travel (1-4 notches), and the efficiency of the brakes and handbrake.
|
|
| • |
Cruise Control: Check the functionality of the Cruise Control system.
|
|
| • |
Heating and ventilation unit: Check the operation of the A/C system and controls. When the outdoor temperature is so low that the A/C cannot be turned on, check its operation indoors.
|
|
| • |
Airbag: Inspect the surface of the steering wheel centre pad (airbag module) and passenger airbag, if fitted, for external damage.
|
|
| • |
Wipers and washers: Check the washer jet pattern and wiper operation on the windscreen.
|
|
| • |
Check that the clock shows the right time.
|
|
Bear in mind the customer's expectations!
Wipe the steering wheel and gear lever clean and make sure that all other traces of pre-delivery inspection and service work have been removed .This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
