Drive belt for auxiliaries
|
|
Drive belt for auxiliaries
|
|
1.
|
Drape wing protectors over the wings and raise the car.
|
|
2.
|
Remove the lower spoiler sections.
|
|
3.
|
Insert two
83 95 238 Wedges
, between the oil sump and subframe and between the gearbox and subframe.
|
|
5.
|
Remove the mass air flow sensor with hose.
|
|
6.
|
Detach the power steering hose from the holder.
|
|
7.
|
Remove the right-hand engine attachment with bracket and engine mount.
|
|
8.
|
Release the multigroove belt from tension.
|
|
1.
|
Fit the multigroove belt.
|
|
2.
|
Fit the right-hand engine mounting with bracket and engine pad.
Tightening torque: To body 63 Nm (46.5 lbf ft)
|
|
3.
|
Fit the power steering hose to the holder.
|
|
4.
|
Fit the mass air flow sensor with hose.
|
|
6.
|
Lower the engine by carefully removing the wedges.
|
|
7.
|
Fit the lower spoiler sections.
|
|
8.
|
Lower the car and remove the wing protectors.
|
