Engine mounting, left-hand
|
|
Engine mounting, left-hand
|
|
1.
|
Drape wing protectors over the wings and remove the cover over the battery.
|
|
2.
|
Disconnect the battery cables, remove the battery and its tray.
|
|
3.
|
Position a jack under the gearbox and take the weight off the engine mounting.
|
|
4.
|
Mark the position of the engine mounting in the bracket to retain the engine's centring.
|
|
5.
|
Remove the engine mounting.
|
|
1.
|
Check that the engine is at the right level. Fit the engine mounting loosely as marked,
|
|
2.
|
Lower the jack and remove it.
|
|
3.
|
Check that the engine hangs neutrally and tighten the engine mounting, using a torque wrench.
Tightening torque:
To body 63 Nm (46.5 lbf ft)
To engine mount 84 Nm (62 lbf ft)
|
|
4.
|
Move the battery tray sideways away from the engine as far as possible. Fit the battery and tray.
|
|
5.
|
Connect the battery cables and fit the cover in place.
|
|
6.
|
Remove the wing protectors. Reset the clock and the radio, if fitted.
|
