Crankshaft

/ 9-5 (9600) / 2001 / 2. Engine / Basic engine, V6 / Technical data / Crankshaft

Crankshaft

General data

Crankshaft end float	mm	0.10-0.76
Maximum journal out-of-round	mm	0.003
Max. allowable rotational deviation	mm	0.05

Big-end bearing journal diameter

Standard	mm	53.990-53.971
First undersize	mm	53,740-53.721
Second undersize	mm	53.490-53.471
Big-end bearing clearance	mm	0.013-0.061

Main bearing journal diameter

Standard	mm	67.980-67.996
First undersize	mm	67.730-67.746
Second undersize	mm	67.480-67.496
Main bearing clearance	mm	0.014-0.043

Main bearings

Standard size

Marking cyl. block	0		1
Size main bearing seat	72.0000-72.0065		72.0065-72.0130
Marking crankshaft	Green	Brown	Green	Brown
Size main bearing journals	67.980-67.988	67.988-67.996	67.980-67.988	67.988-67.996
Main bearing cup in cylinder block	Brown	Brown	Green	Green
Bearing cup in bearing cap	Green	Brown	Green	Brown
Resulting bearing clearance (mm)	0.0160-0.0425	0.0140-0.0405	0.0165-0.0430	0.0145-0.0140

Undersize -0.25

Marking cyl. block	0		1
Size main bearing seat	72.0000-72.0065		72.0065-72.0130
Marking crankshaft	-	-	-	-
Size main bearing journals	67.730-67.738	67.738-67.746	67.730-67.738	67.738-67.746
Main bearing cup in cylinder block	Brown/blue	Brown/blue	Green/blue	Green/blue
Bearing cup in bearing cap	Green/blue	Brown/blue	Green/blue	Brown/blue
Resulting bearing clearance (mm)	0.0160-0.0425	0.0140-0.0405	0.0165-0.0430	0.0145-0.0410

Undersize -0.50

Marking cyl. block	0		1
Size main bearing seat	72.0000-72.0065		72.0065-72.0130
Marking crankshaft	-	-	-	-
Size main bearing journals	67.480-67.488	67.488-67.496	67.480-67.488	67.488-67.496
Main bearing cup in cylinder block	Brown/white	Brown/white	Green/white	Green/white
Bearing cup in bearing cap	Green/white	Brown/white	Green/white	Brown/white
Resulting bearing clearance (mm)	0.0160-0.0425	0.0140-0.0405	0.0165-0.0430	0.0145-0.0410

Permitted resulting bearing clearance

mm

0.0140-0.0430

	Brown	Green	Brown/blue	Green/blue	Brown/white	Green/white
Bearing thickness (mm)	1.989-1.995	1.995-2.001	2.114-2.120	2.120-2.126	2.239-2.245	2.245-2.251

Warning

Always measure the bearing clearance before assembling the engine.

Important
The main bearing halves in bearing caps 2 and 3 have no oilway.