SAAB WIS ONLINE

Secondary air injection pump with hose

Secondary air injection pump with hose

To remove


1. Cover the wings and note the radio code if applicable.

2. Remove the battery cover, undo the battery cables and remove the battery.


3. Undo the connection for the secondary air injection hose.

4. Undo the connector for the secondary air injection pump.

5. Remove the bolts securing the secondary air injection pump. Hold the pump at an angle and detach the plug from the bracket. Lift out the pump.

6. Detach the hoses from the pump.


To fit


1. Attach the hoses to the secondary air injection pump.


2. Make sure the three bushes are positioned correctly so they do not fall out. See illustration.

Put the pump in place, fasten the connector to the bracket and screw on the pump with three bolts.

3. Plug in the secondary air injection pump connector.


4. Connect the secondary air injection hose.

5. Fit the battery, connect the battery cables and fit the battery cover.

6. Set the clock and program the radio code where applicable.