SAAB WIS ONLINE

Charge air control valve

Charge air control valve

To remove


1. Remove the rubber cap and unplug the connector.


2. Mark the hoses to the control valve and detach them.

3. Detach the valve from the expanding pin and metal bracket.


To fit



1. Attach the valve to the metal bracket and then to the expanding pin.

2. Connect the hoses to the control valve. Make sure the markings on the hoses correspond to the markings on the valve.

3. Spray the connector with Kontakt 61 (part no. 30 04 520). Plug in the connector and fit the rubber cap.