SAAB WIS ONLINE

P1603

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE. Idling speed incorrect. Cruise control not working.

P1603


Internal Control Module. Malfunction.


Fault symptoms


CHECK ENGINE.

Idling speed incorrect.

Cruise control not working.


On-Board Diagnostics

Type of diagnosis:


- Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.


Enable criteria:


- Ignition in ON position.


Fault criteria:


- Defective ROM in processor 592.


Dependents:


- None.


System reaction to a fault:


- Throttle control goes into limp-home mode. The limp-home solenoid will be activated 5 times in succession each time the ignition is turned on until the fault has been rectified and the trouble codes cleared.


OK report:


- Accelerator pedal has been depressed at some time and then fully released. 120 s has expired since then without fault criteria being fulfilled.


Fault handling: (See “Fault diagnosis, general” for more information.)


- CHECK ENGINE goes on immediately and can be turned off only by clearing the trouble codes.


Diagnostic help

Fault diagnosis concerns internal control module fault.

See P0605 .