SAAB WIS ONLINE

Control module

Control module

To remove



1. Remove lower panel from driver's side.

2. Remove the fuse cover (To be better able to see what you're doing).


3. Unplug the connector from on the control module.

4. Remove 2 screws (Torx 25) holding DICE.

5. Pull the DICE control module straight out.


To fit



1. Fit the control module in place.

2. Screw tight with 2 screws.

3. Plug in the connector to the control module.


4. Refit the fuse cover.

5. Refit the lower panel.

6. After the DICE control module is replaced, it must be programmed into the car.