ABS lamp
Read the instructions below then start the fault diagnostic procedure.
Symptom: ABS lamp not working.
| ABS lamp |
Fault symptoms
ABS lamp not working.Diagnostic help
The ABS lamp can be turned on and off with the activation command in the diagnostic tool from the TC/ABS control module.Checking the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
