Main beam lamp
Read the instructions below then start the fault diagnostic procedure.
Symptom: Main beam lamp not working.
| Main beam lamp |
Fault symptoms
Main beam lamp not working.Diagnostic help
The lamp is grounded in the main instrument unit and supplied with current from fuse 10.Checking the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
