Turbo gauge
| Turbo gauge |
The main instrument unit is equipped with an electronic turbo gauge.
The gauge is powered and controlled by the main instrument unit control module.
The value displayed by the turbo pointer is based on the following; Trionic calculates the air mass/combustion in mg and converts this information into a value between 0 and 255. Trionic sends this as a bus message: "Turbo gauge". This value corresponds well with the engine torque. The main instrument unit uses this value for the turbo pointer, which is used to inform the driver of the load on the engine.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
