Distance sensor (SPA)
Distance sensor (SPA) |
1. |
Press in the centre of the distance sensor with your thumb (approx. 10 kg pressure).
|
2. |
Undo the 3 locking clips with a small screwdriver.
|
3. |
Pull the distance sensor out of the bumper.
|
4. |
Unplug the distance sensor connector.
|
To fit |
1. |
Plug in the distance sensor connector.
|
2. |
Press the centre of the distance sensor into the sleeve, with the key on the sensor in the groove in the sleeve.
|
3. |
Press home the distance sensor in the bumper, aligning it with the slits on the left-hand edge of the hole.
|