Control module power supply
| Control module power supply |
| +30 |
Pin 2 of the control module connector (K1) is supplied power from fuse 8.
| +15 |
Pin 1 of the control module connector (K1) is supplied current (+15 circuit) from fuse 27.
When current (+15 circuit) is supplied to pin 1, the control module is activated into one of the 3 modes:
| • |
Standby
|
|
| • |
Active
|
|
| • |
Detected
|
|
Which mode the control module enters depends on which gear is selected and whether or not there are any objects behind or alongside the car.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
