CHECK messages
SID can be used by all connected systems to show CHECK messages. When the ignition is turned ON, “CHECKING” appears for approx. 4 seconds. Then a CHECK message is shown if active.
The following message is shown direct (without a 4 second delay):
If a CHECK message is initiated, an acoustic signal is heard, the INFO DISPL lamp in the main instrument unit lights and a message is shown. If the message is preceded by a + sign, more than one message has been activated.
CHECK messages are shown in the following order of priority:
|
2.
|
TRANSMISSION OVERHEATING
|
|
7.
|
WASHER FLUID LEVEL LOW
|
WASHER FLUID LEVEL LOW is shown after a 70 second delay and FILL COOLANT FLUID is shown after a 30 second delay (not when ignition ON “CHECKING”).
The driver acknowledges a message by pressing any button except NIGHT PANEL. If more than one message is activated, the next message is acknowledged in the same way. When a message has been acknowledged, it is not shown again. If the messages are not acknowledged, they are deleted from the display automatically at the rate of one message per minute.
