Drive shaft seal, right-hand side
| Drive shaft seal, right-hand side |
| 1. |
Remove the intermediate shaft, see group 3 Transmission, Drive shafts.
|
|
| 2. |
Remove the seal using a large screwdriver.
|
|
| Fitting |
| 1. |
Lubricate and fit the new seals with tool 83 90 122 and 83 90 148.
|
|
| 2. |
Fit the intermediate shaft, see group 3 Transmission, Drive shafts.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
