Checking the transmission fluid level
|
|
Checking the transmission fluid level
|
Checking and topping up the transmission fluid should be carried out in accordance with the service schedule.
The level of the fluid can be checked in the following manner:
|
1.
|
Position the car on a level surface and apply the handbrake. When checking the fluid level, the transmission should be at operating temperature (approx. + 80°C), which will be attained after driving a distance of approx. 20 km.
|
|
2.
|
Run the engine at idling speed, engage position D and wait at least 15 seconds. Then engage R and wait 15 seconds. Do the same in position P.
|
|
3.
|
Wipe the dipstick clean with a lint-free cloth and put it back in the transmission.
|
|
4.
|
The fluid level should be between the MIN and MAX marks on the side of the dipstick marked +80°C. Top up as necessary with Texaco Texamatic DEXRON III (7045 EU, TL1863 US) through the dipstick pipe. The distance between the marks corresponds to about 0.4 litres.
|
Important
|
|
Fill up with oil through the oil filler hole. Do not remove any other plugs from the top of the gearcase.
|
|
|
|
Important
|
|
Change the fluid if it has a burnt smell or is black.
|
|
|
|
