WINTER shifting program
| WINTER shifting program |
With the selector lever in position 3 only 3rd gear will be used.
WINTER and NORMAL shifting programs can be selected with a switch on the selector lever console.
The switch has two connections, one to control module pin 22 and the other to grounding point G41S. The control module supplies B+ to pin 22. When the button is pressed in, the circuit closes to ground and a change between the shifting programs WINTER and NORMAL is achieved.
The TCM sends information on the current mode as bus information WINTER, unit ON/OFF. In connection with bus information “WINTER ON”, the main instrument unit turns on the WINTER indicator lamp.
Functions in different selector lever positions when the WINTER shifting program is selected:
|
P
|
WINTER can be selected.
|
|
R
|
WINTER can be selected.
|
|
N
|
WINTER can be selected.
|
|
D
|
WINTER program in 3rd and 4th gear. SPORT cannot be selected and is disengaged when WINTER is selected. Normal shifting program is selected temporarily while Kickdown is active.
|
|
3
|
Same as in selector lever position D but 3rd gear is locked.
|
|
2
|
WINTER cannot be selected.
|
|
1
|
WINTER cannot be selected.
|
WINTER will be disconnected if:
| • |
the switch is pressed
|
|
| • |
the ignition is turned to position ON
|
|
| • |
the fluid temperature is >140°C
|
|
| • |
when Limp-Home mode is activated
|
|
| • |
lever position 1 or 2 is selected.
|
|
| • |
kick-down is activated but returns to WINTER when kick-down is disengaged
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
