SAAB WIS ONLINE

System overview

System overview


The desired gear position (PRND321) is selected by means of the selector lever. Movement of the selector lever is transferred by means of a mechanical cable to the selector lever position sensor mounted on the transmission.

The selector lever position sensor is connected to the manual shifting valve in the valve housing, which is also actuated by the selector lever.

The following shift-lock functions are provided in the selector lever housing:

Shift-lock

Shift-lock means that the brake pedal must be depressed and the ignition key turned to the ON position in order to be able to move the gear selector lever from the P-position.

Anti-theft/Starter motor interlock function

The ignition key must be in the ignition and turned to the OFF position in order for the selector lever to be moved from the P-position.

Shift-lock function

The release button on the selector lever must be pressed in to be able to move the lever between the different gears (PRND321).

Shift-lock function

The function means that the brake pedal must be depressed and the ignition key turned to the OFF position in order to be able to move the selector lever from the P-position. The function consists of a microswitch and a solenoid.

The microswitch is actuated by a cam on the selector lever and is closed only when the selector lever is in position P.

The solenoid blocks the selector lever's segment mechanically if it is not activated.

With the brake pedal depressed (brake light switch closed), the solenoid is supplied with power via the microswitch (selector lever in position P). The solenoid is activated and the lock for the selector lever segment is released. The solenoid is grounded at grounding point G42 and the selector lever can be moved from the P-position.


To disable the SHIFT-LOCK function in the event of power loss, proceed as follows:


1. Turn the ignition switch to the OFF position.

2. Depress the oblong button at the side of the selector lever to release the SHIFT-LOCK function.


Anti-theft/Starter motor interlock function

When this function is operative, the ignition key must be inserted in the ignition switch and turned at least to the OFF position before it will be possible to move the selector lever out of position P.

The interlock function consists of the ignition switch, a locking pin and a mechanical cable connecting these components.

When the selector lever is in position P and the ignition switch is in the OFF position, the cable pulls the locking pin into a tooth space to lock the selector lever in position P.

Selector lever position catch

A catch on the selector lever must be activated before it will be possible to move the lever between the different positions (PRND321).

This function consists of a catch, a locking pin and a rod which connects these components. The locking pin blocks the lever in the different positions and when the catch is activated the selector lever is released from the locking segment and can then be moved to the desired position.